 |
|
Getting it sorted out |
|
 |
|
CID:351 Rearwheel HP:320@4500 Torque:280@4200 |
|
|
|
|
|
1975 Ranchero GT after a full frame off restoration. 110000 original miles. Original/rebuilt 351W and C4 |
|
 |
|
CID:351 |
|
|
|
|
65 BFX - Registered User |
1964 sprint
|
|
|
1978 302 .030 over, World jr heads, 9.5-1, Jones cam, Stinger ign, Victor jr intake with a Stage 3 Holley 650, stock bottom end with a 3.89 9 inch and 4 speed T10. |
|
 |
|
1/4 Mile:12.76 MPH:103.00 60ft:1.80 Weight:2800 CID:302 Rearwheel HP:360@6000 |
|
|
|
|
GMendez - Not Confirmed |
1968 Torino GT
|
|
|
No description available. |
|
 |
|
CID:390 |
|
|
|
|
|
Work in progress...just wanted something different to drive. 302/AT GT but I'm putting in the interior from another 500 model due to the GT stuff being rotted from the sun. Hope to one day have the $$$, time, and enegy to drop a 460/C6 combo in her and do some burn outs! |
|
 |
|
CID:302 |
|
|
|
|
|
Begining the restore by Elite Customs in St Charles, MO |
|
 |
|
CID:351 Rearwheel HP:320@4500 Torque:280@4200 |
|
|
|
|
|
My 65 mustang project. Was a straight six 200 but I decided to do a five lug and engine swap from a donor 73 Ford Maverick. Its been a ton of fun tearing into it and learning as much as I can. I striped the car down to the uni-body and re-build and restored from there up. I stripped the car and epoxy primed/sealed. Stripped and painted the interior replacing anything that needed to be replaced. Just waiting for more funds to finish another rebuilt 302 to drop in. And finish the body. More details to come. |
|
 |
|
CID:302 |
|
|
|
|
|
289ci A-code, Holley 600Cfm vac. secundaries, long tube Hooker headers with flow masters, C4, 3:1, Power disc at front, Alu ET 5 spoke wheels, alu brushed center console, from the Netherlands. |
|
 |
|
CID:289 |
|
|
|
|
Falcon62 - Registered User |
1962 2-door sedan
|
|
|
She's a 1977 T-Bird Town Landau I bought in 08' for $900. Had a bad engine so I replaced it with the same 351M. Since then Ive had it in pop's back yard covered up. I'm putting in a bigger cam, new springs, new lifters, new push-rods, new full length headers, EB 4bbl carb, EB intake. The car had seat covers, dash & deck covers since it was bought, so they are still pristine. The body is in great shape, no rust or dents. And all the gadgetry still works. Gonna get everything on her done early Feb. 2010 |
|
 |
|
CID:351 Rearwheel HP:200@0000 Torque:365@0000 |
|
|
|
|
|
My new project, A field find needs floor pans and alot of body work but the winter is comming. |
|
 |
|
CID:260 |
|
|
|
|
67coup - Registered User |
1967 Mustang Coupe
|
|
|
306cid,Comp Cams 281HR,355trutrac,600cfm Holley,RHS Heads,RPM Performer,Tri-Y's,C-4 Auto/Manual VB, |
|
 |
|
1/4 Mile:13.37 MPH:102.30 60ft:2.00 Weight:3130 CID:306 |
|
|
|
|
|
This is a almost exact duplicate of my first car.Which was a Fairlane and is in my profile. Waited a long time to get another. Thisone isnt going anywhere. |
|
 |
|
|
|
|
|
|
trobert3 - Registered User |
1968 500 XL Fastback
|
|
|
New 390 with elderbrock heads, erson roller rockers,31 spline axles,18 inch wheels,true trac posi,fresh rebuild on c6. |
|
 |
|
CID:390 |
|
|
|
|
|
My son's 1968 FB 289, 3 speed, now A/T. Factory bench seat, A/C, P/S, P/B |
|
 |
|
CID:289 |
|
|
|
|
