1974-1978 Mustang
1974 was the beginning of a new era for Mustangs. With fuel prices heading upward, and import car sales surging, Ford responded with the Mustang II - what some called a souped up Pinto. A complete departure from its roots, the Italian designed "Ghia" Mustang featured a standard I4 engine. By 1978 the 302 back, but power wasn't. |
|
|
|
 |
|
Car is RHD! converted from new in the UK, street driven Bracket racer, usual mods, goes great! |
|
 |
|
1/4 Mile:14.33 MPH:95 60ft:2.12 Weight:3014 CID:302 |
|
|
|
|
|
We bought this car in 1979 from a leasing agency in San Diego and are the 2nd owner. 302 V-8 bored 0.060 over, mild dual pattern cam, roller rockers, screw-in studs, ported & polished early 302 non-EGR heads, Edelbrock 600 cfm carb, Weiand XCelerator intake, Blackjack headers, B&M C-4 automatic. |
|
 |
|
CID:302 |
|
|
|
|
llfast - Registered User |
1978 Hatchback
|
|
|
358w,Windsor Sr. heads (heavily ported), KB136, Vic.Jr.1015cfm BLP Holley,Comp XE294H, Crane roller rockers(1.6),Stock bottom end(ARP Bolts),Tubbed, rear halved, mosier axels, 4.86 9" C-4. 4000 Stall converter. FOR SALE ROLLING |
|
 |
|
1/4 Mile:11.44 MPH:116.23 60ft:1.58 Weight:3100 CID:358 Flywheel HP:475@6500 Torque:431@5000 |
|
|
|
|
|
SVO 351W 40 Over
KB Flat top pistons
Dart II Heads shaved to 52cc, 2.02/1.60 valves
flows 315 at .700 intake
flows 215 at .700 exhaust
ISKY Cam: Billet Solid Roller LIFT 640/640, DUR INT284/EX294, DUR AT .050 IS 254/262 with a 108 center
Weiand tunnel ram topped with 2 660 center squirterHolleys
Full Manu...more |
|
 |
|
CID:360 Flywheel HP:572@8000 Torque:530@5500 |
|
|
|
|
|
347 motor based in a 65 289 block with girdle,steel rods and crank,SRP pistons 13.1 comp. runs only on vp c12.Solid .596 lift with 260/270 @.050 dur.vic jr intake holley 750 dp carb,custom made 1 3/4 headers,C-4 trans no brake 5500 8" stall with 9" spooled 33 spline 4.56s |
|
 |
|
1/4 Mile:11.34 MPH:119.21 60ft:1.58 Weight:2850 CID:347 Rearwheel HP:391@6800 Torque:447@3800 |
|
|
|
|
Matt - Registered User |
1977 Ghia
|
|
|
'77 mustang II, factory 302 car, AFR heads, SRP slugs, Crower cam, Victor Jr intake, holley 750 carb, tons of home made parts, and more stuff than I can think of. |
|
 |
|
1/8 Mile:6.70 MPH:102.00 60ft:1.47 Weight:3020 CID:302 |
|
|
|
|
Gael - Registered User |
1978 Mustang Cobra II
|
|
|
393ci, canfield heads, compcams xe274h, 1.6 roller rockers, edelbrock victor jr intake, 650cfm carb, msd 6al ignition, autometer gauges, t5 transmission, MGW shifter, 3.55 gears, nitrous coming soon. |
|
 |
|
1/4 Mile:12.59 MPH:109.00 60ft:1.76 Weight:3200 CID:393 Rearwheel HP:341 Torque:415 |
|
|
|
|
|
402 ci, stroker 351 Windsor with victor heads ported, custom ground cam, 456 gears 4300 stall |
|
 |
|
1/4 Mile:10.49 60ft:1.48 Weight:2650 CID:402 Rearwheel HP:620@7400 Torque:560@7000 |
|
|
|
|
|
1978 Mustang II GHIA
302V8 Swap from a 2.8v6
|
|
 |
|
|
|
|
|
|
|
was completly stock 302 engine waiting for $ to get more power into it. should b running 16's, the past summer i saved a couple bucks and managed to get a 4 brrl Edelbrock and performer intake it was a huge diffrence,i also put a single cherry bomb exhaust,but i had to put the cat back on it had a really nice sound bef...more |
|
 |
|
Weight:2642 Rearwheel HP:155@4000 Torque:330@4800 |
|
|
|
|
