Back in 2024, Solomon Lunger built an all-carbon-fiber F-100 for the SEMA Show. It was an impressive ride, but because of the rush leading up to the show, it wasn’t quite what Solomon Lunger imagined. This year he refined the truck into the ride he always imagined and made a triumphant return to Las Vegas, where it was on display in the TREMEC booth.

For Lunger, the Ford Era founder behind the project, Clyde 2.0 represents more than a second shot at a standout SEMA truck. It is the culmination of 18 years in the automotive aftermarket, a collection of relationships built along the way, and a determination to finish what he started. The exterior might look familiar, but nearly every detail received the attention he had in mind from the jump.
The centerpiece remains the Ford Performance 5.2-liter Predator V8 from the Raptor pickup, now topped by a 3.8-liter Whipple supercharger that pushes it past 900 horsepower. That combination gives the classic pickup distinctly modern performance, but Lunger was just as determined to make the engine compartment look as good as its occupant performs.
Details Matter
The details are everywhere. Full titanium plumbing, Vibrant Performance clamps and AN fittings, custom-fabricated billet connections at the throttle body, and Slosh Tubz inner fenders give the engine bay a cohesive, meticulously finished appearance. The Whipple throttle body is modified with a welded billet mounting flange, eliminating the typical rubber coupler. Even the water lines received similar attention.
“I really tried to make everything as hidden as possible. We have a Vibrant oil catch can, and underneath that are the water pump and reservoirs,” Lunger explained. “We’re running a complete Wizard Cooling setup. That’s pretty much all the fun stuff from under the hood.”
The attention to detail extends well beyond the engine compartment. The truck rides on a Porterbuilt chassis sourced through Fat Fender Garage, featuring a parallel four-link rear suspension and front A-arms. The chassis is finished in Prismatic Powders’ Bent in Red, topped with a Casper clear coat. A Driveshaft Shop carbon-fiber driveshaft transfers power to the rear, while a Boyd Welding fuel tank works with an Aeromotive VaporWorx fuel system designed for the engine’s pulse-width-modulated fuel delivery.
A 3-inch titanium exhaust system from Vibrant Performance completes the underbody hardware. Hutches Welding fabricated the system before Lunger’s friend Dred polished it to complement the rest of the truck.
Inside, a three-piece billet dashboard, steering wheel, and pedals showcase another part of the project’s mission. Those components, along with the custom wheels and taillights, are Solos MFG products developed by Lunger. The six-speed TREMEC Magnum XL transmission, sourced through American Powertrain, gives the supercharged V8 a proper manual gearbox.
Personal Touches
Even the seats have a story. Lunger started with 1969 Mustang Mach 1 bucket seats and adapted their design into a bench seat. The wheels are his own Solos MFG creations, inspired by the original 1969 F-100 Ranger hubcaps. He also specified 305-series Mickey Thompson tires as a nod to his Miami roots and the city’s 305 area code.
Perhaps the most impressive detail is the carbon-fiber craftsmanship itself. Brothers Composites in Sheboygan Falls, Wisconsin, produced the body panels, carefully aligning the carbon weave across the truck while changing its direction to follow the shape of individual panels. That means the weave doesn’t just look consistent from one panel to the next; its orientation follows the contours of the bodywork, a detail that takes considerable planning and precision.
“To me, it’s true artwork. It’s a truck, but it’s really art,” Lunger told us. “If you look at the different panels, the carbon weave changes direction to follow each section, yet everything lines up perfectly. That kind of detail is what makes the work so impressive.”

That craftsmanship helps explain why finishing Clyde 2.0 meant so much to its builder. The original project was rushed together in five months for SEMA 2024, and financial realities eventually forced Lunger to step away before it met his expectations. Returning to the project gave him the opportunity to finish it properly.
“This truck represents 18 years of service in this industry for me,” Lunger said. “I got to put everything I had into it, get all my friends on board, and work with all the companies that supported me. It’s really beautiful to see a dream actually turn into reality.”
Clyde 2.0 isn’t a traditional F-100 restoration, nor is it merely a showpiece wrapped in exotic materials. The thoughtfully engineered chassis, manual transmission, and serious powertrain give it the foundation for real driving enjoyment, while the carbon-fiber body and meticulous finishing make it a standout wherever it parks, even under the bright lights of the SEMA Show.
To see more of Clyde 2.0 and follow Lunger’s latest projects, follow Ford Era on social media or visit the FordEra website.
You might also like
Alpharex’s Modern F-150 Headlights Are Brighter And Bolder
Alpharex Nova Series headlights upgrade 2024-2026 F-150 models with advanced LED projectors, sharper beams, and aggressive styling.