Snow Performance Introduces Water/Meth System For The Holley Hi-Ram

Snow Performance Introduces Water/Meth System For The Holley Hi-Ram

Chris McWilliams
March 12, 2020

Snow Performance introduces a simple method to add water/methanol injection for the Holley Hi-Ram EFI manifolds. This system can decrease incoming air temperatures by up to 100 degrees F.

Official Release:

Have a Holley Hi-Ram EFI intake manifold on your turbo or supercharged GM LS/LT1 or small block Ford? Snow Performance says its Water/Methanol Injection System system can decrease incoming air temperatures by up to 100-degrees F and unleash an extra 50 to 70 horsepower. The water/methanol injection also helps suppress detonation so you can turn up the boost and adjust timing to make even more power.

The Snow Performance system features the VC-50 controller that proportionally injects more or less water/methanol mix based on boost pressure. You can adjust the injection starting and full-engagement points so the water/methanol delivery curve matches your engine’s needs. The controller has a seven-color LED screen that displays boost (1-50 PSI), injection percentage, low water level, secondary stage activation, prime button, and system fault codes.

Snow Performance recommends this Water/Methanol Injection System for street-driven vehicles with turbos or centrifugal superchargers. It fits these Holley Hi-Ram intake manifolds:

  • GM LS
  • GM LT1
  • 289-302-5.0L Small Block Ford
  • Ford 351W

Features:

  • U.S.A. Made
  • Adjustable Progressive Water Methanol Engagement & Monitoring
  • Digital Boost Reading (1-50 PSI)
  • Recommended For Street Driven Turbo and Centrifugal Supercharger Applications
  • Supports 1,000+ HP
  • 100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
  • Snow Performance Hyper-Sonic Water Methanol Nozzles (8 x #2 nozzles)
  • Snow Performance ACU-SEAL Water Methanol Compression Fittings
  • Snow Performance OEM Approved Extreme Environment 300 PSI UHO Water Methanol Pump
  • Snow Performance Running “S” Engraved Low Profile Nozzle Holder
  • Snow Performance Running “S” Engraved Low Profile High Flow Check Valve
  • Snow Performance Solenoids
  • Stainless hardlines pre-plumbed on plate

For more information on this product and others, please visit Snow Performance’s website.