Ford’s flat-plane crank V8 gives the Mustang Shelby GT350 an unmistakable exhaust note and high-revving track pedigree, but the naturally aspirated powerplant can feel sluggish below 3,000 rpm. After developing a mid-mount turbo system for the S650 Mustang, the team at SPE Motorsport adapted the hardware to turbocharge an S550 Shelby GT350.
At the heart of the system sits a pair of midmounted 6060 turbochargers built on a GT30 architecture. SPE Motorsport’s Dan Snyder selected these units to complement the GT350’s TREMEC six-speed manual gearbox and bolster the stock engine’s low-end response.
“This is our 6060 GT350-based turbo, and it lights really nice and is responsive,” Snyder says. “We spec’d these turbos specifically for stick cars so the boost is right there, and you don’t have to wait for the turbos to come on between shifts.”
Even when shifting into Third and Fourth, or rolling into Fifth gear, boost arrives instantly and blows the rear tires off in Second gear. Getting a boosted flat-plane V8 to behave smoothly on the street presented a major calibration hurdle. Across 700 data logs over two days, Snyder reworked the tune so the torque curve builds progressively rather than hitting all at once.
“On any of the newer Mustangs from 2005 and up, everything in the factory Ford ECU is torque-based,” Snyder explained. “On a car like this that is really anemic down low stock, having all that air rush in throws the torque values backward, so getting the turbo system to play nice with the factory algorithm was tough.”

SPE Motorsport engineered the twin-turbo Shelby GT350 package so drivers can modulate power with partial pedal inputs on a road course. Running 7 pounds of boost with the traction control fuse pulled, the setup hits like a two-stroke dirt bike up top while remaining predictable during normal street cruising.
Even at modest boost levels, the midmount kit pushes the surrounding factory components to their mechanical ceiling. The stock fuel pump is maxed out, and the factory twin-disc clutch sits right on the edge of its capacity, snapping back sharply as the light pressure plate engages. While SPE Motorsport plans to sell the bolt-on turbo hardware for these cars without retail tuning, the test car proves how rowdy the setup is.
You might also like
Clyde 2.0 Carbon Fiber F-100 Returns In Fully Realized Form
Clyde 2.0 brings Solomon Lunger’s carbon-fiber F-100 dream to life. The Ford Era build returned to SEMA with refined details.