Those looking to order the 2013 Boss 302S, you are in luck. According to an announcement by Ford Racing Performance Parts, you can now submit orders for the 2013 Boss 302S by using Part Number: M-FR500-B302S.
Just like last year, only a limited number of fifty Boss 302S Mustangs will be produced and are meant to compete in events that last less than an hour. These serialized Mustangs were introduced in 2011 and the Boss 302S has won the World Challenge GTS Manufacturers Championship, World Challenge GTS Driver Championship, NASA American Iron Championship and the NASA ST2 Championship. Also, this Mustang has tied a record that was placed back in 1970 for race wins by the same Mustang driver in a pro-series, and that record is five.
The factory steering has been recalibrated along with the ABS and ECU giving this car a high quality racing package that will suit reliable to any customers who get their hands on one. If you don’t want to spend twice as much on a reliable race car, the Boss 302S is ready to go and you an order one now with two-way adjustable dampers for $84,995 and the upgraded version with 3-way dampers for $88,995. If you didn’t know already, the Boss 302S is off-road only, without a VIN number, and is a turn-key race-prepped car for the race series mentioned above. Most parts are available from any Ford Racing dealer.
Technical Specs:
Engine
5.0L Boss R engine
Engine oil cooler
FR serialized intake badge
Boss 302 fuel system
Upgraded cooling system
Driveline
5L Boss 6 speed transmission with stock Boss 302 clutch/flywheel
Torsen Diff
3.73 gears
FR1 Muffler
Chassis
Front: coil over struts
Front lower control arms with extended ball joint and delrin bushing kit
FR adjustable front swaybar
Caster/Camber plates
Rear: coil over shocksTubular lower control arms with spherical bearings
FR Swaybar
EPAS with unique Ford Racing calibration
FIA Spec 6 point roll cage
Electrical
Lightened FR wiring harness
AMB Transponder
Switch plate – Start/ignition, aux switches
Interior
AIM data acquisition system with GPS
Recaro HANS Pro Racer seat
Fire system with 2 nozzles
Quick release racing steering wheel
Window net
Safety system triangle nets
6 point racing harness
Master cut off switch
Exterior
Color: White or School Bus Yellow
FR front splitter
Rear adjustable CF wing
Unique fiberglass hood with air extractors
Hood pins
19 x 9 -inch front wheels
19 x 10-inch rear wheels
Boss 302S graphics package
Front and Rear Tow Hooks
Brakes
Brembo race 4 piston front brake system
2 piece 14″ front rotors
1 piece 12″ rear rotors
PFC racing pads
Brake duct kit
Stainless steel brake lines
FR brake booster assembly
Unique FR ABS calibration