For NHRA and IHRA vehicles running nitrous oxide, it is required to have a shut off valve inside the car once you get over a certain ET. A lot of people were building make-shift shut off valves that could not handle the 1000+ psi of pressure that normal nitrous kits flow.
Nitrous Express has built their version of the ball valve. The valve is made from billet aluminum and comes with – 4 AN to – 8 AN fittings and the option for female or male inlets. It also features a half-inch orifice and a direct flow, straight through design, which is capable of flowing enough nitrous to accommodate 2,000-horsepower. The valve features a 1/8″ NPT port for a nitrous pressure gauge or a nitrous pressure sensor.
• – 4 AN to – 8 AN with male or female fittings
• Half-inch orifice flows enough nitrous to accommodate 2,000-horsepower
• 1/8″ NPT port for a nitrous pressure gauge or a nitrous pressure sensor
Also new for Nitrous Express is their new fuel system line. This includes a wide variety of pumps and regulators for both high pressure EFI and low pressure carbureted systems. A standard two port carbureted regulator is currently available with a boost reference high pressure version to be released soon. The current inline fuel pumps will have 500, 750, and 1000-horsepower configurations.
You might also like
The 1,200HP Megazilla 2.0 Is Ford Racing’s Most Powerful Crate Engine Yet
Debuted in the Frostwarden Bronco, Ford Racing’s Megazilla 2.0 delivers 1,200 horsepower. It is the company’s most powerful crate engine ever.
