Video: Gale Banks Explains Why Turbos Are The Best Power Adder

Just east of Los Angeles is the city of Azusa, where Gale Banks calls home to his iconic company — Gale Banks Engineering. Under the Banks Engineering umbrella is four divisions, each dedicated to separate branches of the automotive performance aftermarket; Banks Power, Banks Technology, Banks Marine, and Banks Racing.

From enthusiasts to professional racers, and even contracts with the U.S. Military, Banks’ products can be found powering naturally aspirated or turbocharged gas and diesel engines at your local racetrack (both on track and tow rigs), on the water, and on the battlefield.

In the video above, the team at /Drive  had the opportunity to sit down with Gale Banks at the Wally Parks NHRA Motorsports Museum to learn a little more about turbocharger systems and why Banks believes it’s the best forced induction option for the internal combustion engine.

The Difference And The Advantage

Remember, in theory an engine is nothing more than an air pump, and how much power an engine is capable of producing is directly related to how much air it can displace per cycle. Which is where the saying, “There’s no replacement for displacement,” gets its credence.

This means that, in essence, both superchargers and turbochargers are just air compressors for your air pump. Meaning that forced induction improves an engine’s power by drastically increasing the overall density of the same volume of air. And while they both exist to serve the same purpose, the difference comes in how they’re driven.

The modern useage of the term supercharger refers specifically to an air compressor driven mechanically off of the crankshaft, where parasitic power loss occurs since it literally takes power to make power. While a turbocharger has the advantage of being an air compressor driven solely off of the unused energy of the exhaust gases, which does not have a parasitic effect and would otherwise just be wasted.

In the realm of high-end turbocharger technology, the last 15 years has seen a boom in variable geometry turbocharger (VGT) designs for diesels and even a few gasoline designs capable of handling the higher associated EGTs in more recent years.

VGTs allow for a single turbocharger to operate efficiently across a wide range of shaft speeds and boost pressure combinations by continuously altering the width of the passage that directs exhaust gases into the turbine housing, demonstrating virtually no lag and improved throttle response without hindering the top end performance of a large turbo.

The Challenge

Remembering what was taught in our high school physics class — by increasing the density of the air being ingested by the engine through turbocharging (compressing), we subsequently end up greatly increasing the intake charge temperature before the air is again compressed by the piston. So the primary challenge then becomes controlling cylinder temperatures to prevent detonation and internal engine damage caused by this increase in heat and pressure.

Engine builders rely on a several different methods to adequately control the intake charge, and depending on how your application is being utilized — an air to air intercooler may work best for you, maybe an air to water, or even no intercooler at all with some of the more exotic race fuels, like methanol.

Final Thoughts

It’s always a treat to hear someone as passionate and knowledgeable as Gale Banks is about turbochargers speak on the topic. If you want to hear an industry icon talk about his life’s passion, this video is for you. Who knows, you just might even learn something new.

Article Sources

About the author

Kyle Kitchen

Born and raised in Southern California, Kyle has been a gearhead ever since seeing his first Mitsubishi Evo VIII in 2003. He is almost entirely self taught mechanically, and as an inexperienced enthusiast always worked on his own vehicles, regardless of the difficulty, just to learn how to do it himself. Prior to becoming a freelance writer for the company, Kyle started his automotive performance career with Power Automedia as a shop technician, where he gleaned intimate knowledge of LS platforms and drag racing builds; then later joining the editorial team as the Staff Writer for EngineLabs And Turnology. Today, Kyle is an experienced EFI calibrator; hot rod builder; and motorsports technician living in the San Jose area. Kyle is a track junkie with lots of seat time. You can usually find him racing his Mitsubishi Evo X in local time attack and road race events.
Read My Articles

Blue Oval Muscle in your inbox.

Build your own custom newsletter with the content you love from FordMuscle, directly to your inbox, absolutely FREE!

Free WordPress Themes