When it comes time to retrofit your Mustang with upgrades, don’t leave your rearend hanging with its stock setup. Chassis Engineering is providing a better way with its new XTR bolt-in 9-inch housing, complete with 3/8-inch moly face plate, adjustable shock mounts, and more. See details below.

Official Release:

Chassis Engineering introduces the Mustang XTR Bolt-in 9” housing.  This extreme housing offers unequalled strength and versatility.

The XTR fabricated housing utlizes 3/8” thick multi-layer moly face plate and internally braced 3.5 o.d. x .250 wall moly tubing. Versatility comes from multi-1/2” hole upper and lower control arm mounts, the ability to specify the location of the lower control arm mounts and aluminum adjustable shock mounts. The XTR will accept any 9” center including 9-1/2” ring gears.

Features:

• 3/8-inch multi-layer moly face plate
• Internally braced 3.5x.250 wall moly tubing
• Ability to specify location of lower control arm mounts
• Aluminum adjustable shock mounts
• Accepts any 9-inch center including 9.5-inch ring gears